3 In 1 Combination Generator For N Manufacturers, Suppliers in UAE, Dubai

Combination Gas Generator for UHP Nitrogen, Zero Air & Hydrogen
Nitrogen & Air Generator produces a continuous flow of high purity Nitrogen at selected pressure
The modular Pressure Swing Adsorption (PSA) unit operates with alternating pressure increase and decrease.

Air flows under pressure through the reaction towers containing molecular sieve adsorber.
Moisture, CO, CO, THC, Oxygen and other unwanted components in the air are adsorbed, leaving Zero Air & Nitrogen Gas of required purity.
High Purity Hydrogen Gas Generator.
Hydrogen is produced in the PGH Series Hydrogen Generators by the most advanced electrolytic membrane technology.
The application of voltage across the electrolyte results in hydrolysis, breaking down the water molecule into hydrogen and oxygen gas, which are separated by the gas permeable membrane.
Modular & Stackable, Floor Space Saving design with small footprint.

Principle	N ₂ Gas	Zero Air	H ₂ Gas
Moisture	< 5ppm	< 5ppm	< 5ppm
Oxygen	< 5ppm	-	< 5ppm
Total Hydrocarbon (THC)	0.5 ppm	0.3 ppm	0.3 ppm
CO & CO2	< 2ppm	< 2ppm	< 2ppm
Purity	UHP	UHP	UHP
Micron particles	0.01μ	0.01μ	0.01μ
Capacity of NHZA-03A	200 ml/min at 5kg/cm ²	1500 ml/min at 5kg/cm ²	300 ml/min at 5kg/cm ²
Air Compressor	Inbuilt	Inbuilt	NA
Method of Purification	Pressure Swing Adsorption and Depressurization	Catalytic conversion Filtration	PEM Technology
Room Temperature	10°C to 25°C
Start up time	2hr/programmable by timer	10 min	30 min
Electrical Supply	230 V AC, 50Hz, 1ph, 5 amp
Size of the 3 in 1 Generator	1100 H X 350 W X 600 D mm
Weight (approx.)	90 kg
Power Consumption	600W
Gas Outlet Port	1/8" OD	1/8" OD	1/8" OD

3 in 1 Combination Generator for N 2