Nitrogen Concentrator / Sample Evaporator
Nitrogen Concentrator is a Precision Sample Concentrator by Nitrogen Purging.
The dispensing rate of high quality Ultrapure water is 2 L/min.
It is newly designed Sample Concentrator for multiple sample pre-concentration of samples in organic media. A tabletop model, the unit can be set to a constant flow and constant temperature to ensure good evaporation.
Technical Specifications
- Space Requirements : Table top or fume hood with minimum dimension L, W & H (cms) 70 x 50 x 65 and table weight capacity 35 kg.
- Work Area : Flat levelled and stable surface
- Power Supply : 230 AC / 5 Amp single phase stable and well grounded.
- Gas Supply : Laboratory grade nitrogen
- Inlet Pressure : 60 PSI minimum, 100 PSI maximum (And ON / OFF control valve)
- Exhaust : Exhaust duct outlet or fume hood - the exhaust duct must go outside the lab.
- Water Bath Capacity : 6.5 Ltr. distilled water (6.5 Ltr. do not over flow)
Technical Specifications
- Time Range : 15 sec to 10 hours
- Time Set Up / Down arrow keys (15 sec increments)
- Temperature Range : Ambient to 90°C (thermal cutout for safety)
- Temperature Set Up / Down arrow keys (1oC increment)
- Start / Stop : Green LED indication when process is On
- Display : LCD (Digital)
- Gas Stations : 5 Nos. with LED indication
- Pressure Regulator Range : 0 to 100 PSI (approximate)
- Pressure Gauge Range : 0 to 100 PSI
- Controlled : Fully Microprocessor Based
- Sample Capacity : 50 Nos.
- Gas Line : 5 Nos. (1-10 samples per line,nozzle caps provided)
- Water Tank Capacity : 6.5 Ltr, (Not over flow)
- Dimensions : 600 (L) X 520 (H) X 400 (W) mm
- Weight : 25 kgs. (Empty tank)
- Exhaust : Built-in exhaust, no fume hood required
- Power Supply : 230 V AC / 6 Amp
- Error Indication : LED indication with Buzzer
Technical Specifications
- Time Range : 15 sec to 10 hours
- Time Set Up / Down arrow keys (15 sec increments)
- Temperature Range : Ambient to 90°C (thermal cutout for safety)
- Temperature Set Up / Down arrow keys (1oC increment)
- Start / Stop : Green LED indication when process is On
- Display : LCD (Digital)
- Gas Stations : 5 Nos. with LED indication
- Pressure Regulator Range : 0 to 100 PSI (approximate)
- Pressure Gauge Range : 0 to 100 PSI
- Controlled : Fully Microprocessor Based
- Sample Capacity : 50 Nos.
- Gas Line : 5 Nos. (1-10 samples per line,nozzle caps provided)
- Water Tank Capacity : 6.5 Ltr, (Not over flow)
- Dimensions : 600 (L) X 520 (H) X 400 (W) mm
- Weight : 25 kgs. (Empty tank)
- Exhaust : Built-in exhaust, no fume hood required
- Power Supply : 230 V AC / 6 Amp
- Error Indication : LED indication with Buzzer
100 Samples Concentrator
- Work Area : Flat levelled and stable surface
- Gas Supply : Laboratory Grade Nitrogen
- Inlet Pressure : minimum 60 - maximum 100 PSI (And ON / OFF control valve)
- Exhaust : Built-in exhaust, no fume hood required
- Water Bath Capacity : 11 Ltr. distilled water
- Sample Tube : 12mm x 75 mm (4 ml) RIA Tubes
Technical Specifications
- Time Range : 15 sec to 10 hours
- Time Set Up / Down arrow keys (15 sec increments)
- Temperature Range : Ambient to 90°C (thermal cutout for safety)
- Temperature Set Up / Down arrow keys (1oC increment)
- Start / Stop : Green LED indication when process is On
- Display : LCD (Digital)
- Gas Stations : 12 Nos. with LED indication
- Pressure Regulator Range : 0 to 100 PSI (approximate)
- Pressure Gauge Range : 0 to 100 PSI
- Controlled : Fully Microprocessor Based
- Gas Line : 12 Nos.
- Water Tank Capacity : 6.5 Ltr, (Not over flow)
- S.S Rack 16mm x 100 mm Test Tub
- Standard fittings like Nuts, Ferrules,Union, Couplings, clamps,Hardware etc